Gas Safe registered · Booking installs this monthWhatsApp us
M3Boilers logoM3Boilers

Plumbing

Toilet repairs

Toilet not flushing, won't stop running, leaking onto the floor or blocked? Broken toilets are the job we get called out to most. Our vans carry the common fill valves, flush mechanisms, siphons, seals and pan connectors, so most toilets are working again on the first visit.

Common toilet problems we fix

Toilet won't flush

Broken flush mechanism, split siphon diaphragm, snapped handle linkage, faulty push-button or a cistern not filling — diagnosed and replaced the same visit.

Toilet keeps running

Worn fill valve, float set wrong or a failed flush valve washer letting water past into the pan and up your water bill.

Toilet leaking

Leaks from the cistern, the pan connector or the base of the toilet. We trace it properly rather than sealing over it.

Weak or slow flush

Part-blocked rim jets, low cistern water level or a tired siphon — cleaned, adjusted or replaced and flow tested.

Blocked toilet

Plunged, augered and jetted where needed, then flow tested so it doesn't come straight back.

Wobbly or loose pan

Re-fixed, re-sealed and levelled so it stops rocking and leaking onto the floor.

New toilet fitted

Close coupled, back-to-wall and concealed cistern units supplied and fitted, old one taken away.

Toilet repair prices

Toilet repair

Fill valve, flush mechanism or cistern fault

£120 inc VAT

Toilet unblocked

Plunged, augered and flow tested

£105 inc VAT

Pan re-seal & re-fix

Leaking or rocking toilet made solid

£120 inc VAT

New toilet fitted

Supply-and-fit from, old unit removed

£295 inc VAT

Concealed cistern repair

Access panel work, frame-mounted units

£150 inc VAT

Emergency call-out

First hour on site, leak made safe

£99 inc VAT

All prices include VAT. Includes standard flue, fitting and system flush. Confirmed after a free survey.

Why call us for a broken toilet

  • Same-day slots kept free for leaking and overflowing toilets.
  • Vans stocked with common fill valves, flush mechanisms, seals and pan connectors.
  • Fixed price agreed before we start — no hourly rate creep.
  • Insured, Gas Safe registered engineers with 200+ verified reviews.
  • We tidy up and take the old unit away on replacements.
  • 12-month guarantee on our workmanship.

Coverage

Do we cover you?

Toilet repair FAQs

How much does it cost to fix a toilet?

Most repairs are £120 inc VAT including the common parts. Blockages start at £105 inc VAT and a full supply-and-fit replacement starts at £295 inc VAT.

Can you come out today?

Usually yes for leaks and overflows — call 07791 178784 and we'll tell you the next free slot honestly.

Why is my toilet not flushing?

Nine times out of ten it's the flush mechanism: a split siphon diaphragm, a failed drop-valve washer, a broken handle or push-button linkage, or a cistern that isn't refilling because the fill valve has jammed. All are cheap parts we carry on the van, so a toilet that won't flush is usually fixed in under an hour.

My toilet won't flush but the cistern is full — what now?

That points at the flush mechanism rather than the water supply. Lift the cistern lid and watch the handle: if it moves freely with no resistance, the linkage or siphon has failed. Don't keep pumping it — call us and we'll swap the mechanism.

My toilet is leaking from the bottom — is it urgent?

Yes, get it looked at quickly. A leak at the base is usually the pan connector or a failed seal, and left alone it rots flooring and can come through a ceiling below. We re-seal and re-fix from £120 inc VAT.

My toilet keeps running — is that expensive?

No. It's almost always the fill valve or flush valve washer, both cheap parts we carry. It's worth fixing quickly because a running toilet can waste hundreds of litres a day on a water meter.

Do you supply the new toilet?

We can supply and fit, or fit one you've already bought. Either way we take the old one away.

Do you fix concealed cistern toilets?

Yes. Frame-mounted and back-to-wall units take longer because of the access panel, so we price those separately once we've seen it.

Free quote

Get your price in 60 seconds

Step 2 / 4

60 second plumbing quote

Who are we quoting for?

Name and mobile first so we can get your price to you even if you don't finish the form. No hard sell — we only call if you ask.

Add your name and mobile to continue.

By continuing you agree we can contact you about this enquiry. We never share your details.

Call WhatsApp